Setup View

The Setup View is used to configure a new vehicle prior to first flight and/or tune an a configured vehicle.

Setup Options

To the left of the screen are the set of available setup options. A setup button is marked with a red icon if there are still settings needed to be adjusted/specified. You should not fly if any of these are red. In the above image the Radio setup is not yet complete.

Note: The set of options shown and the contents of each option may differ based on whether the vehicle is running PX4 Pro or ArduPilot firmware. The image above is from a vehicle which is running PX4 Pro firmware.

Summary
An overview of all the important setup options for your vehicle. Similar to the individual setup buttons, the summary blocks show a red indicator when those settings are not fully configured.

Firmware
Flash new firmware onto your vehicle.

Airframe
Specify the airframe type for the vehicle.

Radio
Calibrate your Radio Control Transmitter.

Sensors
Calibrate the sensors on the vehicle.

Flight Modes
Used to assign flight modes to your RC Transmitter switches.

Power
Battery settings and additional power options such as ESC calibration.

Safety
Specify settings for options related to Safety such as Return to Home or Failsafes.

Tuning
Tune flight characteristics of the vehicle.

Camera
Configure settings for camera and gimbal.

Parameters
Allows you to modify all parameters associated with your vehicle.